Struct nix::net::if_::InterfaceFlags

[+] Show declaration

pub struct InterfaceFlags { /* fields omitted */ }

[−] Expand description

Standard interface flags, used by getifaddrs

Methods

impl InterfaceFlags[−]

pub const IFF_UP: InterfaceFlags[−][−]

Interface is running. (see netdevice(7))

pub const IFF_BROADCAST: InterfaceFlags[−][−]

Valid broadcast address set. (see netdevice(7))

pub const IFF_DEBUG: InterfaceFlags[−][−]

Internal debugging flag. (see netdevice(7))

pub const IFF_LOOPBACK: InterfaceFlags[−][−]

Interface is a loopback interface. (see netdevice(7))

pub const IFF_POINTOPOINT: InterfaceFlags[−][−]

Interface is a point-to-point link. (see netdevice(7))

pub const IFF_NOTRAILERS: InterfaceFlags[−][−]

Avoid use of trailers. (see netdevice(7))

pub const IFF_RUNNING: InterfaceFlags[−][−]

Resources allocated. (see netdevice(7))

pub const IFF_NOARP: InterfaceFlags[−][−]

No arp protocol, L2 destination address not set. (see netdevice(7))

pub const IFF_PROMISC: InterfaceFlags[−][−]

Interface is in promiscuous mode. (see netdevice(7))

pub const IFF_ALLMULTI: InterfaceFlags[−][−]

Receive all multicast packets. (see netdevice(7))

pub const IFF_MASTER: InterfaceFlags[−][−]

Master of a load balancing bundle. (see netdevice(7))

pub const IFF_SLAVE: InterfaceFlags[−][−]

Slave of a load balancing bundle. (see netdevice(7))

pub const IFF_MULTICAST: InterfaceFlags[−][−]

Supports multicast. (see netdevice(7))

pub const IFF_PORTSEL: InterfaceFlags[−][−]

Is able to select media type via ifmap. (see netdevice(7))

pub const IFF_AUTOMEDIA: InterfaceFlags[−][−]

Auto media selection active. (see netdevice(7))

pub const IFF_DYNAMIC: InterfaceFlags[−][−]

The addresses are lost when the interface goes down. (see netdevice(7))

pub const IFF_LOWER_UP: InterfaceFlags[−][−]

Driver signals L1 up. Volatile.

pub const IFF_DORMANT: InterfaceFlags[−][−]

Driver signals dormant. Volatile.

pub const IFF_ECHO: InterfaceFlags[−][−]

Echo sent packets. Volatile.

pub const IFF_NO_PI: InterfaceFlags[−][−]

Do not provide packet information

pub const IFF_TUN: InterfaceFlags[−][−]

TUN device (no Ethernet headers)

pub const IFF_TAP: InterfaceFlags[−][−]

TAP device

pub const fn empty() -> InterfaceFlags[−]

Returns an empty set of flags

pub const fn all() -> InterfaceFlags[−]

Returns the set containing all flags.

pub const fn bits(&self) -> c_int[−]

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: c_int) -> Option<InterfaceFlags>[−]

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: c_int) -> InterfaceFlags[−]

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: c_int) -> InterfaceFlags[−]

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

pub const fn is_empty(&self) -> bool[−]

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool[−]

Returns true if all flags are currently set.

pub const fn intersects(&self, other: InterfaceFlags) -> bool[−]

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: InterfaceFlags) -> bool[−]

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: InterfaceFlags)[−]

Inserts the specified flags in-place.

pub fn remove(&mut self, other: InterfaceFlags)[−]

Removes the specified flags in-place.

pub fn toggle(&mut self, other: InterfaceFlags)[−]

Toggles the specified flags in-place.

pub fn set(&mut self, other: InterfaceFlags, value: bool)[−]

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl Binary for InterfaceFlags[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.

impl BitAnd<InterfaceFlags> for InterfaceFlags[+]

type Output = InterfaceFlags

The resulting type after applying the & operator.

fn bitand(self, other: InterfaceFlags) -> InterfaceFlags[−]

Returns the intersection between the two sets of flags.

impl BitAndAssign<InterfaceFlags> for InterfaceFlags[+]

fn bitand_assign(&mut self, other: InterfaceFlags)[−]

Disables all flags disabled in the set.

impl BitOr<InterfaceFlags> for InterfaceFlags[+]

type Output = InterfaceFlags

The resulting type after applying the | operator.

fn bitor(self, other: InterfaceFlags) -> InterfaceFlags[−]

Returns the union of the two sets of flags.

impl BitOrAssign<InterfaceFlags> for InterfaceFlags[+]

fn bitor_assign(&mut self, other: InterfaceFlags)[−]

Adds the set of flags.

impl BitXor<InterfaceFlags> for InterfaceFlags[+]

type Output = InterfaceFlags

The resulting type after applying the ^ operator.

fn bitxor(self, other: InterfaceFlags) -> InterfaceFlags[−]

Returns the left flags, but with all the right flags toggled.

impl BitXorAssign<InterfaceFlags> for InterfaceFlags[+]

fn bitxor_assign(&mut self, other: InterfaceFlags)[−]

Toggles the set of flags.

impl Clone for InterfaceFlags[+]

[+] Show hidden undocumented items

fn clone(&self) -> InterfaceFlags[−]

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)[−]

Performs copy-assignment from source.

impl Copy for InterfaceFlags

impl Debug for InterfaceFlags[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.

impl Eq for InterfaceFlags

impl Extend<InterfaceFlags> for InterfaceFlags[+]

[+] Show hidden undocumented items

fn extend<T: IntoIterator<Item = InterfaceFlags>>(&mut self, iterator: T)[−]

Extends a collection with the contents of an iterator.

impl FromIterator<InterfaceFlags> for InterfaceFlags[+]

[+] Show hidden undocumented items

fn from_iter<T: IntoIterator<Item = InterfaceFlags>>(
    iterator: T
) -> InterfaceFlags[−]

Creates a value from an iterator.

impl Hash for InterfaceFlags[+]

[+] Show hidden undocumented items

fn hash<__H: Hasher>(&self, state: &mut __H)[−]

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, [−]

Feeds a slice of this type into the given [Hasher].

impl LowerHex for InterfaceFlags[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.

impl Not for InterfaceFlags[+]

type Output = InterfaceFlags

The resulting type after applying the ! operator.

fn not(self) -> InterfaceFlags[−]

Returns the complement of this set of flags.

impl Octal for InterfaceFlags[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.

impl Ord for InterfaceFlags[+]

[+] Show hidden undocumented items

fn cmp(&self, other: &InterfaceFlags) -> Ordering[−]

This method returns an [Ordering] between self and other.

[+] Expand attributes

#[must_use] fn max(self, other: Self) -> Self[−]

Compares and returns the maximum of two values.

[+] Expand attributes

#[must_use] fn min(self, other: Self) -> Self[−]

Compares and returns the minimum of two values.

[+] Expand attributes

#[must_use] fn clamp(self, min: Self, max: Self) -> Self[−]

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl PartialEq<InterfaceFlags> for InterfaceFlags[+]

[+] Show hidden undocumented items

fn eq(&self, other: &InterfaceFlags) -> bool[−]

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &InterfaceFlags) -> bool[−]

This method tests for !=.

impl PartialOrd<InterfaceFlags> for InterfaceFlags[+]

[+] Show hidden undocumented items

fn partial_cmp(&self, other: &InterfaceFlags) -> Option<Ordering>[−]

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &InterfaceFlags) -> bool[−]

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &InterfaceFlags) -> bool[−]

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &InterfaceFlags) -> bool[−]

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &InterfaceFlags) -> bool[−]

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl StructuralEq for InterfaceFlags

impl StructuralPartialEq for InterfaceFlags

impl Sub<InterfaceFlags> for InterfaceFlags[+]

type Output = InterfaceFlags

The resulting type after applying the - operator.

fn sub(self, other: InterfaceFlags) -> InterfaceFlags[−]

Returns the set difference of the two sets of flags.

impl SubAssign<InterfaceFlags> for InterfaceFlags[+]

fn sub_assign(&mut self, other: InterfaceFlags)[−]

Disables all flags enabled in the set.

impl UpperHex for InterfaceFlags[+]

[+] Show hidden undocumented items

fn fmt(&self, f: &mut Formatter) -> Result[−]

Formats the value using the given formatter.